How to Store Your Youtooz Collection Safely During a Move
By Youtooz Collectibles | Published: 2026-10-13
Category: Tips & Care
A step-by-step plan for packing Youtooz plush, pins, and figures so they arrive without crushed boxes, bent pins, or scratched paint.
Quick answer
Pack Youtooz in three separate layers: plush in breathable cotton bags inside a rigid box, pins in a binder or on a stiff backing board, and figures in their original boxes with padding around every side. Keep the original packaging if you have it, label each box by room, and never stack heavy items on top of a collectible box. The goal is to limit movement and moisture, not to seal everything airtight.
Start with the original packaging
The box a Youtooz figure or plush arrived in was designed for shipping. Its internal tray, window, and outer dimensions already limit movement, so reusing it is the fastest way to protect the item. If you kept the box, slide the figure back into its plastic insert and close the lid. If the box is gone, choose a rigid cardboard box that leaves at least 1 inch of space on every side for padding.
For plush like the American Robin Plush (9in) or Meg White Plush (9in), the original box may be too large to keep for every item. In that case, a clean cotton drawstring bag works well because it lets the fabric breathe while keeping dust off. Avoid vacuum-sealing plush, which can crush the stuffing and leave permanent creases.
Separate pins from everything else
Enamel pins are the most likely item to scratch or snag during a move. A pin binder with foam pages keeps each pin in its own slot and prevents metal backs from scraping against neighboring pins. If you do not have a binder, push each pin through a piece of stiff felt or foam board and wrap the board in acid-free tissue. Do not toss loose pins into a plastic bag with other items, even for a short trip.
The Sun and Moon Hanging Pin measures 4.2 inches tall, so it needs a page or backing board large enough to cover the full height. A pin that overhangs the edge of its backing can bend at the post. Check that the pin back is secure before packing, and keep a small bag of extra rubber backs in your carry-on or glove box.
Control temperature and moisture
Vinyl figures and plush both dislike extreme heat. A moving truck parked in the sun can reach temperatures that soften vinyl or warp a plush's shape. If you are driving your own vehicle, keep collectibles in the air-conditioned cabin rather than the trunk. For a professional move, ask the mover to load collectibles last and unload them first so they spend less time in the truck.
Moisture is the quieter risk. Do not pack collectibles directly against a concrete garage floor or an exterior wall. Add a small silica gel packet to each box of figures or pins, but skip silica for plush, since it can pull too much moisture from the fabric. If you are storing boxes for more than a few weeks, check them monthly for any sign of dampness or pests.
Move-day packing steps
- Sort by material: Group plush, pins, and figures into separate piles before you pack anything. Plush goes in breathable bags, pins go on backing boards or in a binder, and figures go in their original boxes or a rigid box with padding. Checkpoint: if a pile mixes materials, separate it now rather than digging through a packed box later.
- Line every box: Add a layer of bubble wrap or crumpled paper to the bottom of each box. Place items so they cannot slide, then fill all gaps on the top and sides. A box that rattles when gently shaken is not packed tightly enough. Common mistake: leaving empty space at the top, which lets items shift and crush each other.
- Label by fragility, not just by room: Write 'Collectibles — This Side Up' on every box and mark which boxes contain pins or figures. Use a marker, not a sticker that can fall off in the truck. Checkpoint: take a photo of each labeled box before it leaves your home.
- Load collectibles last, unload them first: Tell your movers which boxes are fragile and ask them to load those last so they sit near the door. In your own vehicle, keep them in the cabin with you rather than the trunk. Common mistake: letting heavy furniture sit on top of collectible boxes for the whole drive.
- Unpack within 48 hours: Open collectible boxes as soon as you arrive. Check for shifted items, condensation, or bent pins. Let plush air out for a few hours before returning it to a shelf. Next step: if anything is damaged, photograph it immediately and contact the seller or mover before you throw away the packaging.
Product facts that affect packing
- American Robin Plush (9in): The American Robin Plush (9in) is a seated plush with a burnt orange belly, navy wings, and a plum head and back, plus a patch of Velcro attached. The Velcro patch can snag other fabrics in transit, so wrap the plush in tissue or place it in its own cotton bag before boxing.
- Meg White Plush (9in): The Meg White Plush (9in) sits at 9 inches tall and wears a white dress with patterns across the chest, waist, and hem. The white dress shows dirt and creases easily, so use a clean, lint-free inner wrap and avoid packing it against dark or abrasive materials.
- Sun and Moon Hanging Pin: The Sun and Moon Hanging Pin is an enamel pin measuring 4.2 inches tall with a shiny finish and dangling stars. The dangling stars and tall shape need a backing board or binder page that fully supports the pin, or the stars can bend during handling.
